Re:WOW what a difference *proper* float level makes! - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Jetting

Re:WOW what a difference *proper* float level makes!

Favoured: 11

Page:
<< Start < Prev 1 2 3 4 5 Next > End >>

TOPIC: Re:WOW what a difference *proper* float level makes!

Forum Tools

#885455

Doc_V (User)

Platinum Boarder

Posts: 6530

Re:WOW what a difference *proper* float level makes! 2 Years, 9 Months ago

texasscott1 wrote:
loosen the float screw enough to slip the pin and float out then bend the tang slightly whichever way it needs to go to change the level.

I'm a little confused about loosening the float screw and slipping the pin; you can bend the tang without removing those... Does it have to do with seating the needle?

Also, the big question is, *what do you set the float at* and how do you measure it? ...Or is it trial and error until you get the fuel level right?

Logged

It\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'s been lots of fun guys... Thank you Gram and catch you all on the other site.

The administrator has disabled public write access.

#885464

texasscott1 (User)

Two of a kind

Platinum Boarder

Posts: 4486

Re:WOW what a difference proper float level makes! 2 Years, 9 Months ago
I've never tried to bend the tang without removing the float. I check it before removing the bowl to begin with then if it needs adjustment I know about how far to bent the tang. Usually only takes once or twice.

Logged

My 99 Standard Test Mule
Scott B.

The administrator has disabled public write access.

#885561

brianmac (User)

Platinum Boarder

Posts: 2180

Re:WOW what a difference *proper* float level makes! 2 Years, 9 Months ago

i would not bend tab without slippin float off first, you may damage it. you loosen the single screw that holds the float pivot pin in place a small amount, and the pin and float pop off. then u move the tab carefully with a small slotted scredriver ever so little to get it corrcted, trial and error, and try to aim the top flat part of float at the thing in ODOS pictures for a starting point. the i measure with tube, or some just leave it there.

Logged

[img size=150][/img]

The administrator has disabled public write access.

#885630

texasscott1 (User)

Two of a kind

Platinum Boarder

Posts: 4486

Re:WOW what a difference proper float level makes! 2 Years, 9 Months ago
That and I like to hold the metal piece when I'm bending the tang. The attachment to the float looks too flimsy to bend it while just holding the float.

Logged

My 99 Standard Test Mule
Scott B.

The administrator has disabled public write access.

Page:
<< Start < Prev 1 2 3 4 5 Next > End >>

Forum List

Technical Corner

Jetting

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Miscellaneous, 2/18/2018, 52 replies Subject: The Last Post BikerRon: Hopefully, someone can take a screenshot of the last post before the plug is pulled and share it on the new site. Curious as to who it will be and what inspiring words will be left. :) Latest reply, 2/22/2018 Shores: You lose!The Last Post 53 posts, last by: Shores In: Miscellaneous, 2/17/2018, 9 replies Subject: Come on over! Tykes_Place: There's a lot of posts here since the new site launched. We might have a plan to retain the old site data, but it's not guaranteed. So why not take the discussions over to the new site? http://www.roadstarclinic.com ... Latest reply, 2/22/2018 Shores: I’ll be there in a minute. Go getchur scooter! Come on over! 10 posts, last by: Shores In: Miscellaneous, 2/21/2018, 30 replies Subject: Logins will be disabled Thursday night (2/22)!! Gram: Hi Everyone, The time has come for us to start the process of winding the old clinic down. The new team has commissioned a site archive of this site, which requires an extensive site crawling process, ... Latest reply, 2/22/2018 Shores: Logins will be disabled Thursday night (2/22)!! 31 posts, last by: Shores In: Miscellaneous, 2/22/2018, 6 replies Subject: Time to tie up lose ends - the end is near! mbk: Time to tie up all the loose ends - the end of life of this forum is only an hours away. I Want to thank Gram, Doc, USAFRetired, and all the others for all this site did for us and the money of ours it ... Latest reply, 2/22/2018 Jaybo: Time to tie up lose ends - the end is near! 7 posts, last by: Jaybo In: Miscellaneous, 2/14/2018, 41 replies Subject: Last one out shut the lights off. JEastonjr: I just like to say one last thing on this site. I think I joined in 2010 and this was and is the best forum I found. The people were friendly and helpful when I didn't know squat about the biggest bike ... Latest reply, 2/22/2018 Jaybo: yup!Last one out shut the lights off. 42 posts, last by: Jaybo In: Miscellaneous, 2/22/2018, 12 replies Subject: Thursday Night Music pbirk: Latest reply, 2/22/2018 Jaybo: Thursday Night Music 13 posts, last by: Jaybo In: Non Motorcycle Topics, 2/22/2018 Subject: So many friends I haven't met yet Lifeguard: I have made some good friends here and I hope to make many more on the new site. Learned alot and laughed alot. See you over there and thanks to everyone.:woohoo: So many friends I haven't met yet new topic by: Lifeguard In: Miscellaneous, 2/22/2018, 3 replies Subject: Tipping My Hat Bigrigme: It's been a great run. I won't be the last to post here, nor does being in the race for that interest me any. But I didn't want to walk away without a goodbye. Gram and Doc, everybody here including myself, ... Latest reply, 2/22/2018 Chromeinator: Tipping My Hat 5 Hours, 8 Minutes ago It's been a great run. I won't be the last to post here, nor ...Tipping My Hat 4 posts, last by: Chromeinator In: Miscellaneous, 2/22/2018, 1 reply Subject: It was a great run TMK: Thanks Gram...12 1/2 years for me and appreciate it very much! Latest reply, 2/22/2018 Jadams1911: Thank you for the great years of the RSC!It was a great run 2 posts, last by: Jadams1911 In: Jetting, 2/15/2018, 16 replies Subject: dynojetting Ian Pemberton: Hello again,I would like some advice for getting my bike properly dynojetted. I have fitted a spike air filter and Vance & Hines short shots(baffles in)along with Harley torque cones in the headers. All ... Latest reply, 2/22/2018 Ian Pemberton: Thanksdynojetting 17 posts, last by: Ian Pemberton In: Technical Discussions, 1/19/2015, 92 replies Subject: Fuel Injection Facts and Tips Shores: Hey all you FI guys and gals. What about posting everything you know about tuning, adjusting and repairing our ? We can start here, see what comes of it and ... Latest reply, 2/21/2018 AzTank: Long coming update. So, due to work and family schedules getting the priority, i'm finally able to ...Fuel Injection Facts and Tips 93 posts, last by: AzTank In: Body/Frame, 2/6/2018, 12 replies Subject: Now, Saddle bags,,, ronzee: Okay, everyone who said the bags I had on my bike wouldn't work with the stock exhaust system, you were right. Harley hard bags are just a little too long. Can't see any good coming out of the bag sitting ... Latest reply, 2/21/2018 ronzee: Kinda fixed it. just got smaller bags. 30.00 on e-Bay with keys unlike the ones that were on it.:side:Now, Saddle bags,,, 13 posts, last by: ronzee In: Non Motorcycle Topics, 2/21/2018 Subject: Better save your PMs now if you want them. Doc_V: If you have any information in your PMs that you want to save, better do it now. When the site is archived, that section will no longer be accessible since it requires a log in to access. So if there's ... Better save your PMs now if you want them. new topic by: Doc_V In: Miscellaneous, 2/19/2018, 25 replies Subject: $20 saves ALL 14 YEARS of the original RSC forever BubbaKahuna: IMPORTANT PLEASE READ Can you chip in $20 each to save ALL 14 years of the original RSC? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We have a unique opportunity to save the ... Latest reply, 2/21/2018 Doc_V: That's not a bad idea and would be a lot easier to just drag and drop the files on to the USB sticks. ...$20 saves ALL 14 YEARS of the original RSC forever 26 posts, last by: Doc_V In: Bike Talk, 2/18/2018, 2 replies Subject: Road glide mount Engineman: Is there anymore out that there as I want to mount a road glide fairing on my bike? So who is the one that made a bunch for us to buy from? Thank you Brett Latest reply, 2/21/2018 Engineman: Thank you mort!Road glide mount 3 posts, last by: Engineman In: Introductions, 4/16/2011, 35 replies Subject: new to the rsc roadiemort: but have been lurking a long time.really love this forum and all the help and knowledge thats available here. i ride ... Latest reply, 2/20/2018 brad_g: :welcome:I would like to welcome myself to the clinic, thanks Mike:laugh: :laugh: PS My AIS is still ...new to the rsc 36 posts, last by: brad_g In: Miscellaneous, 2/20/2018 Subject: Be sure to head over to the NEW RSC site! Doc_V: As was recently announced by Gram, this RSC site will be shutting down soon. The original date was to be February 28th, however, since a new site is already set up and this site will be archived, we ... Be sure to head over to the NEW RSC site! new topic by: Doc_V In: Pics of My Ride, 7/10/2016, 86 replies Subject: Roadstar 1600cc Turbo Ypsilon: Hi guys! I'm new to the clinic and wanted to show my ride. Had this baby for couple of years and turbocharged it last winter. Works great and the power is good except for a little dip in the enrichment ... Latest reply, 2/20/2018 Littlebull: Got one not being used. If I remember you are in another country. Send zipcode and will get shipping ...Roadstar 1600cc Turbo 87 posts, last by: Littlebull In: Miscellaneous, 2/14/2018, 12 replies Subject: Mobile App Subscription for Apple & Android BubbaKahuna: OK, we've got the 'forum part' of the RSC Mobile App paid for. I haven't got to the Android store yet but Apple wants $99/year to put the app in their store. This will automatically renew every year ... Latest reply, 2/19/2018 BubbaKahuna: It looks like it, we're kind of scrambling on a couple fronts right now but we should be good to go! I'm ...Mobile App Subscription for Apple & Android 13 posts, last by: BubbaKahuna In: Miscellaneous, 12/9/2017, 13 replies Subject: 4Gauge upgraded battery cable sale $45 shipped davej: I have 3 sets made and ready to ship $45 shipped in the U.S. I will ship elsewhere but shipping cost will be added. More sets are available if needed. Latest reply, 2/19/2018 davej: Glenn402 you have a message check PM I sent to you.4Gauge upgraded battery cable sale $45 shipped 14 posts, last by: davej In: Introductions, 2/16/2018, 8 replies Subject: Hello everybody! Greetings from Mexico! Skyjadur Ulfur: Hello people, I'm from Mexico, I introduce to you Fenrir, a 2005 RoadStar Midnight Silverado S, would like some advises to improve overall performance and how to mount properly a Reckless Fairing, thanks ... Latest reply, 2/19/2018 Skyjadur Ulfur: Thanks for the link, unfortunately it doest work, I cant get the facebook page! even with the link you ...Hello everybody! Greetings from Mexico! 9 posts, last by: Skyjadur Ulfur In: Miscellaneous, 2/14/2018, 12 replies Subject: Left Testical no longer for sale Warden: Please ignore the ad in the classifieds. :) Latest reply, 2/19/2018 roadiemort: :woohoo: :woohoo: Left Testical no longer for sale 13 posts, last by: roadiemort In: Non Motorcycle Topics, 2/13/2018, 4 replies Subject: Thank you Bubbakahuna! Messer: I did a lot of bitching, but, wow the new site freaking rocks! Great job Bubbakahuna! Latest reply, 2/18/2018 Chromeinator: +1Thank you Bubbakahuna! 5 posts, last by: Chromeinator In: Non Motorcycle Topics, 2/18/2018, 4 replies Subject: All smilies for new board Tykes_Place: Just posting this so I can download the image for the new board. :bbash: :welcome: :tank: :oops: :offtopic: :popcorn: :censored: :sleep: :innocent: :biglove: :pinch: :whistle: :evil: :S :side: :woohoo: ... Latest reply, 2/18/2018 Tykes_Place: Good idea.All smilies for new board 5 posts, last by: Tykes_Place In: Miscellaneous, 2/16/2018, 13 replies Subject: Bike stand makriluc: Any one of you guys ever work on your R* with this ? http://cyclesource.com/newsblog/?p=35475 Your opinion? Latest reply, 2/18/2018 davej: They look to be very well made.Bike stand 14 posts, last by: davej In: Maintenance, 1/11/2016, 16 replies Subject: Work Shop Tach question G_Conway: I have seen a number of posts regarding what hand held tach to use on our bikes. Many have stated that a coil proximity type is better than wire induction. My question, I believe, relates to both. Should ... Latest reply, 2/18/2018 BikerRon: Guess I am still in the dark ages...I have an old runabout with a chevy 350 still running on ...Work Shop Tach question 17 posts, last by: BikerRon In: Miscellaneous, 2/17/2018, 3 replies Subject: Awesome R,s roadiemort: http://www.midnight-ride.com/baronew.htm Latest reply, 2/17/2018 ctkog: That's one sweet ride Gram. All it needs is the rear fender lowering kit. No I'm not trying to sell you ...Awesome R,s 4 posts, last by: ctkog In: Miscellaneous, 2/13/2018, 37 replies Subject: NEW BOARD IS UP & RUNNING @ ..... BubbaKahuna: Same address, just add WWW to the current address of roadstarclinic.com http://www.roadstarclinic.com Subtle difference in the address, but makes all the difference in the world to a server. Feel ... Latest reply, 2/17/2018 Tykes_Place: 40 character chain? The new site doesn’t do anything like that.NEW BOARD IS UP & RUNNING @ ..... 38 posts, last by: Tykes_Place In: Miscellaneous, 2/11/2018, 17 replies Subject: Favorite Modular Helmets Bigrigme: I'm in the market this spring to replace my old Icon full face helmet. I like the modular designs. I'm not looking to spend $600 but I also will not be settling for a sub $200 helmet either. What do you ... Latest reply, 2/16/2018 mrjeff: While looking to see who still had these in stock I found some on eBay for such a good price I bought ...Favorite Modular Helmets 18 posts, last by: mrjeff In: Miscellaneous, 2/16/2018, 6 replies Subject: How do I get ‘permissions’ - can’t post or reply Ratl: Ok, I’ve registered and logged in to the new site, but evidently I don’t have ‘permissions’ to reply or create topics etc. :dry: What am I missing? Latest reply, 2/16/2018 BubbaKahuna: You have a PMHow do I get ‘permissions’ - can’t post or reply 7 posts, last by: BubbaKahuna

New Forum Posts

In: Miscellaneous, 2/18/2018, 52 replies
Subject: The Last Post
BikerRon: Hopefully, someone can take a screenshot of the last post before the plug is pulled and share it on the new site. Curious as to who it will be and what inspiring words will be left. :)

Latest reply, 2/22/2018
Shores: You lose!The Last Post

53 posts, last by:

Shores

In: Miscellaneous, 2/17/2018, 9 replies
Subject: Come on over!
Tykes_Place: There's a lot of posts here since the new site launched. We might have a plan to retain the old site data, but it's not guaranteed. So why not take the discussions over to the new site? http://www.roadstarclinic.com ...

Latest reply, 2/22/2018
Shores: I’ll be there in a minute. Go getchur scooter! Come on over!

10 posts, last by:

Shores

In: Miscellaneous, 2/21/2018, 30 replies
Subject: Logins will be disabled Thursday night (2/22)!!
Gram: Hi Everyone, The time has come for us to start the process of winding the old clinic down. The new team has commissioned a site archive of this site, which requires an extensive site crawling process, ...

Latest reply, 2/22/2018
Shores: Logins will be disabled Thursday night (2/22)!!

31 posts, last by:

Shores

In: Miscellaneous, 2/22/2018, 6 replies
Subject: Time to tie up lose ends - the end is near!
mbk: Time to tie up all the loose ends - the end of life of this forum is only an hours away. I Want to thank Gram, Doc, USAFRetired, and all the others for all this site did for us and the money of ours it ...

Latest reply, 2/22/2018
Jaybo: Time to tie up lose ends - the end is near!

7 posts, last by:

Jaybo

In: Miscellaneous, 2/14/2018, 41 replies
Subject: Last one out shut the lights off.
JEastonjr: I just like to say one last thing on this site. I think I joined in 2010 and this was and is the best forum I found. The people were friendly and helpful when I didn't know squat about the biggest bike ...

Latest reply, 2/22/2018
Jaybo: yup!Last one out shut the lights off.

42 posts, last by:

Jaybo

In: Miscellaneous, 2/22/2018, 12 replies
Subject: Thursday Night Music
pbirk:

Latest reply, 2/22/2018
Jaybo: Thursday Night Music

13 posts, last by:

Jaybo

In: Non Motorcycle Topics, 2/22/2018
Subject: So many friends I haven't met yet
Lifeguard: I have made some good friends here and I hope to make many more on the new site. Learned alot and laughed alot. See you over there and thanks to everyone.:woohoo:
So many friends I haven't met yet

new topic by:

Lifeguard

In: Miscellaneous, 2/22/2018, 3 replies
Subject: Tipping My Hat
Bigrigme: It's been a great run. I won't be the last to post here, nor does being in the race for that interest me any. But I didn't want to walk away without a goodbye. Gram and Doc, everybody here including myself, ...

Latest reply, 2/22/2018
Chromeinator: Tipping My Hat 5 Hours, 8 Minutes ago It's been a great run. I won't be the last to post here, nor ...Tipping My Hat

4 posts, last by:

Chromeinator

In: Miscellaneous, 2/22/2018, 1 reply
Subject: It was a great run
TMK: Thanks Gram...12 1/2 years for me and appreciate it very much!

Latest reply, 2/22/2018
Jadams1911: Thank you for the great years of the RSC!It was a great run

2 posts, last by:

Jadams1911

In: Jetting, 2/15/2018, 16 replies
Subject: dynojetting
Ian Pemberton: Hello again,I would like some advice for getting my bike properly dynojetted. I have fitted a spike air filter and Vance & Hines short shots(baffles in)along with Harley torque cones in the headers. All ...

Latest reply, 2/22/2018
Ian Pemberton: Thanksdynojetting

17 posts, last by:

Ian Pemberton

In: Technical Discussions, 1/19/2015, 92 replies
Subject: Fuel Injection Facts and Tips
Shores: Hey all you FI guys and gals. What about posting everything you know about tuning, adjusting and repairing our ? We can start here, see what comes of it and ...

Latest reply, 2/21/2018
AzTank: Long coming update. So, due to work and family schedules getting the priority, i'm finally able to ...Fuel Injection Facts and Tips

93 posts, last by:

AzTank

In: Body/Frame, 2/6/2018, 12 replies
Subject: Now, Saddle bags,,,
ronzee: Okay, everyone who said the bags I had on my bike wouldn't work with the stock exhaust system, you were right. Harley hard bags are just a little too long. Can't see any good coming out of the bag sitting ...

Latest reply, 2/21/2018
ronzee: Kinda fixed it. just got smaller bags. 30.00 on e-Bay with keys unlike the ones that were on it.:side:Now, Saddle bags,,,

13 posts, last by:

ronzee

In: Non Motorcycle Topics, 2/21/2018
Subject: Better save your PMs now if you want them.
Doc_V: If you have any information in your PMs that you want to save, better do it now. When the site is archived, that section will no longer be accessible since it requires a log in to access. So if there's ...
Better save your PMs now if you want them.

new topic by:

Doc_V

In: Miscellaneous, 2/19/2018, 25 replies
Subject: $20 saves ALL 14 YEARS of the original RSC forever
BubbaKahuna: IMPORTANT PLEASE READ Can you chip in $20 each to save ALL 14 years of the original RSC? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We have a unique opportunity to save the ...

Latest reply, 2/21/2018
Doc_V: That's not a bad idea and would be a lot easier to just drag and drop the files on to the USB sticks. ...$20 saves ALL 14 YEARS of the original RSC forever

26 posts, last by:

Doc_V

In: Bike Talk, 2/18/2018, 2 replies
Subject: Road glide mount
Engineman: Is there anymore out that there as I want to mount a road glide fairing on my bike? So who is the one that made a bunch for us to buy from? Thank you Brett

Latest reply, 2/21/2018
Engineman: Thank you mort!Road glide mount

3 posts, last by:

Engineman

In: Introductions, 4/16/2011, 35 replies
Subject: new to the rsc
roadiemort: but have been lurking a long time.really love this forum and all the help and knowledge thats available here. i ride ...

Latest reply, 2/20/2018
brad_g: :welcome:I would like to welcome myself to the clinic, thanks Mike:laugh: :laugh: PS My AIS is still ...new to the rsc

36 posts, last by:

brad_g

In: Miscellaneous, 2/20/2018
Subject: Be sure to head over to the *NEW* RSC site!
Doc_V: As was recently announced by Gram, this RSC site will be shutting down soon. The original date was to be February 28th, however, since a *new* site is already set up and *this* site will be archived, we ...
Be sure to head over to the *NEW* RSC site!

new topic by:

Doc_V

In: Pics of My Ride, 7/10/2016, 86 replies
Subject: Roadstar 1600cc Turbo
Ypsilon: Hi guys! I'm new to the clinic and wanted to show my ride. Had this baby for couple of years and turbocharged it last winter. Works great and the power is good except for a little dip in the enrichment ...

Latest reply, 2/20/2018
Littlebull: Got one not being used. If I remember you are in another country. Send zipcode and will get shipping ...Roadstar 1600cc Turbo

87 posts, last by:

Littlebull

In: Miscellaneous, 2/14/2018, 12 replies
Subject: Mobile App Subscription for Apple & Android
BubbaKahuna: OK, we've got the 'forum part' of the RSC Mobile App paid for. I haven't got to the Android store yet but Apple wants $99/year to put the app in their store. This will automatically renew every year ...

Latest reply, 2/19/2018
BubbaKahuna: It looks like it, we're kind of scrambling on a couple fronts right now but we should be good to go! I'm ...Mobile App Subscription for Apple & Android

13 posts, last by:

BubbaKahuna

In: Miscellaneous, 12/9/2017, 13 replies
Subject: 4Gauge upgraded battery cable sale $45 shipped
davej: I have 3 sets made and ready to ship $45 shipped in the U.S. I will ship elsewhere but shipping cost will be added. More sets are available if needed.

Latest reply, 2/19/2018
davej: Glenn402 you have a message check PM I sent to you.4Gauge upgraded battery cable sale $45 shipped

14 posts, last by:

davej

In: Introductions, 2/16/2018, 8 replies
Subject: Hello everybody! Greetings from Mexico!
Skyjadur Ulfur: Hello people, I'm from Mexico, I introduce to you Fenrir, a 2005 RoadStar Midnight Silverado S, would like some advises to improve overall performance and how to mount properly a Reckless Fairing, thanks ...

Latest reply, 2/19/2018
Skyjadur Ulfur: Thanks for the link, unfortunately it doest work, I cant get the facebook page! even with the link you ...Hello everybody! Greetings from Mexico!

9 posts, last by:

Skyjadur Ulfur

In: Miscellaneous, 2/14/2018, 12 replies
Subject: Left Testical no longer for sale
Warden: Please ignore the ad in the classifieds. :)

Latest reply, 2/19/2018
roadiemort: :woohoo: :woohoo: Left Testical no longer for sale

13 posts, last by:

roadiemort

In: Non Motorcycle Topics, 2/13/2018, 4 replies
Subject: Thank you Bubbakahuna!
Messer: I did a lot of bitching, but, wow the new site freaking rocks! Great job Bubbakahuna!

Latest reply, 2/18/2018
Chromeinator: +1Thank you Bubbakahuna!

5 posts, last by:

Chromeinator

In: Non Motorcycle Topics, 2/18/2018, 4 replies
Subject: All smilies for new board
Tykes_Place: Just posting this so I can download the image for the new board. :bbash: :welcome: :tank: :oops: :offtopic: :popcorn: :censored: :sleep: :innocent: :biglove: :pinch: :whistle: :evil: :S :side: :woohoo: ...

Latest reply, 2/18/2018
Tykes_Place: Good idea.All smilies for new board

5 posts, last by:

Tykes_Place

In: Miscellaneous, 2/16/2018, 13 replies
Subject: Bike stand
makriluc: Any one of you guys ever work on your R* with this ? http://cyclesource.com/newsblog/?p=35475 Your opinion?

Latest reply, 2/18/2018
davej: They look to be very well made.Bike stand

14 posts, last by:

davej

In: Maintenance, 1/11/2016, 16 replies
Subject: Work Shop Tach question
G_Conway: I have seen a number of posts regarding what hand held tach to use on our bikes. Many have stated that a coil proximity type is better than wire induction. My question, I believe, relates to both. Should ...

Latest reply, 2/18/2018
BikerRon: Guess I am still in the dark ages...I have an old runabout with a chevy 350 still running on ...Work Shop Tach question

17 posts, last by:

BikerRon

In: Miscellaneous, 2/17/2018, 3 replies
Subject: Awesome R*,s
roadiemort: http://www.midnight-ride.com/baronew.htm

Latest reply, 2/17/2018
ctkog: That's one sweet ride Gram. All it needs is the rear fender lowering kit. No I'm not trying to sell you ...Awesome R*,s

4 posts, last by:

ctkog

In: Miscellaneous, 2/13/2018, 37 replies
Subject: NEW BOARD IS UP & RUNNING @ .....
BubbaKahuna: Same address, just add WWW to the current address of roadstarclinic.com http://www.roadstarclinic.com Subtle difference in the address, but makes all the difference in the world to a server. Feel ...

Latest reply, 2/17/2018
Tykes_Place: 40 character chain? The new site doesn’t do anything like that.NEW BOARD IS UP & RUNNING @ .....

38 posts, last by:

Tykes_Place

In: Miscellaneous, 2/11/2018, 17 replies
Subject: Favorite Modular Helmets
Bigrigme: I'm in the market this spring to replace my old Icon full face helmet. I like the modular designs. I'm not looking to spend $600 but I also will not be settling for a sub $200 helmet either. What do you ...

Latest reply, 2/16/2018
mrjeff: While looking to see who still had these in stock I found some on eBay for such a good price I bought ...Favorite Modular Helmets

18 posts, last by:

mrjeff

In: Miscellaneous, 2/16/2018, 6 replies
Subject: How do I get ‘permissions’ - can’t post or reply
Ratl: Ok, I’ve registered and logged in to the new site, but evidently I don’t have ‘permissions’ to reply or create topics etc. :dry: What am I missing?

Latest reply, 2/16/2018
BubbaKahuna: You have a PMHow do I get ‘permissions’ - can’t post or reply

7 posts, last by:

BubbaKahuna

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.