The primary method used to extract coal and bitumen reserves found in Alberta. Although not widespread, surface mining involves an intense, local alteration of the landscape, the removal the large quantities of overburden (soil, glacial till bedrock) to expose the hydrocarbon resource buried underneath. When mining operations are completed, they usually leave a series of open pits that must be reclaimed.
This method is best suited to widespread fault seams of such materials such as clay and coal, or compact near-surface bodies such as some types of uranium. The choice of open pit mining or underground mining in the case of uranium depends on the depth of the deposit, how easily the rocks and soil on top of the core can be removed and, finally, economics. The amount of overburden that must be removed to expose the seam varies
Surface mining is generally less costly and more flexible than underground mining. This type of mining also recovers a higher percentage of coal in a deposit. This type of mining involves removing the topsoil or surface earth, also called overburden from the area to be mined. This is done with huge draglines that have buckets. The cover soil removed is stockpiled for later reclamation. Up to 69 cubic meters of earth may be removed, all at one time. Sometimes the use of explosives is required to crumble the overburden. Stripping the topsoil reveals the coal seam. The coal seam is then mined using "shovels".These shovels can remove up to 16 cubic meters of coal at one time.
Generally, extraction technology in non-mountainous areas involves the use of massive draglines in order to remove the overburden and expose the coal seams. Power shovels and trucks are used to haul the coal to a nearby processing facility. Some general environmental pressures include noise levels (machinery, blasting), air quality (coal dust), water quality and stream diversions, soil and vegetation removal. Reclamation of open pit coal mines tends to be more difficult in mountainous areas because of the naturally shallow soil depth and greater variations in topography.
