hide You are viewing an archived web page, collected at the request of University of Alberta using Archive-It. This page was captured on 17:01:19 Dec 08, 2010, and is part of the HCF Alberta Online Encyclopedia collection. The information on this web page may be out of date. See All versions of this archived page. Loading media information
Heritage Community Foundation Presents
Alberta Online Encyclopedia
Alberta Inventors and Inventions - A Century of Patents homeinfosearchsitemapcontactedukit

      Heritage Community Foundation
      Alberta Innovation and Science
      Canada's Digital Collections

Continuous Sulphur Dioxide Stack Monitoring

The continuous sulphur dioxide (SO2) stack monitoring system devised by Ed Adams, Robin Rankine, Edward Hardy and Joseph Lukacs utilized spectroscopic technology employed by astronomers, and direct recording by computers, to provide a continuous record of SO2 emissions from oil and natural gas refineries.

The monitoring system was a significant improvement over the old procedure, which involved sending a technician up a smokestack to record the emission levels from an emissions detection station. That particular system was prone to erroneous emissions reporting, and as government air quality standards became more rigorous during the late 1960s, there was a need for another continuous monitoring system.

The detection apparatus was mounted on the refinery or plant stack, and used a tube and thermocouple array to sample the stack emissions, while a Pitot tube (one tube set perpendicular to the flow, the other set parallel) measured stack flow rates. The SO2 analyzer had a light source at one end, with a photo multiplier at the other end.

As the light from the sample passed the spectroscope, it would give off light with the characteristic absorption spectrum of SO2. The absorption spectrum helped measure the concentration of sulphur dioxide in the plant, and these measurements were then fed to a computer processor to generate continuous emission records.

The direct benefit of the continuous stack monitoring allows plant operators to monitor SO2 emissions that comply with air quality regulations. Plant operators could also use the stack monitoring system to track and improve their process efficiency, since the quantity and concentration of SO2 gas released could indicate production problems or equipment malfunctions.

The continuous stack monitoring system was initially deployed in oil and sour gas refineries. It has since been adapted for use in coal-fired generating stations and pulp and paper mills.

[<<back] timeline

Albertasource.ca | Contact Us | Partnerships
For more on innovation and invention in Alberta , visit Peel’s Prairie Provinces.
Copyright © Heritage Communty Foundation All Rights Reserved