<
 
 
 
 
×
>
hide You are viewing an archived web page collected at the request of Road Star Clinic using Archive-It. This page was captured on 18:28:51 Feb 23, 2018, and is part of the Road Star Clinic Closure collection. The information on this web page may be out of date. See All versions of this archived page. Loading media information

This is an archived version of the Road Star Clinic. The Road Star Clinic can now be found at www.roadstarclinic.com. Please join us there!

How To Adjust the Accelerator Pump

Print
User Rating: / 49
PoorBest 
Written by Mr Tidy   
Friday, 11 June 2004

Reprinted by permission from Mr Tidy's tech tips

On the 40mm Mikuni Carburetor 

One of the problems I've had with the Road Star is a coughing or backfiring out the carburetor through the breather. One of the cures is to  decrease amount of fuel injected by the accelerator pump when first opening the  throttle. 

Look in the lower right-hand portion of the image, this is the area of the accelerator pump.

Duration adjustment

  1. The "blue" colored screw in the image is the duration adjustment screw. Underneath the head of the screw is a lock nut and the bracket arm that the screw is threaded into.  To decrease the amount of fuel squirted  the adjustment screw is turned "clockwise" or in.  To increase the amount of fuel squirted the adjustment screw is turned "counter clockwise"  or out.  To get the max, amount of decrease remove the screw and take the lock nut off of the screw.  Then replace the screw into the cam arm, then replace the lock nut underneath the arm on the screw. this gives you another 3/32" of an inch in which the screw can be screwed in.

  2. Start your engine, Blip your throttle open, if the engine stutters, (hesitates), it is not getting enough fuel so turn the screw counter clockwise to increase the amount of fuel squirted from the accelerator pump into the carburetor.  Keep blipping the throttle and adjusting the screw till the carburetor starts to cough. Stop here and
    turn the screw back in till the coughing stops.  Tighten down the lock nut.  This should give you the best throttle response with the least amount of coughing and backfiring out the carburetor.

Timing Adjustment Screw

This is the "Green" colored screw just above the Blue duration adjustment screw.  The" Mucker" said it best,,,,, This upper screw adjusts the "timing" of the squirt. By altering it's setting, you can advance or delay the onset of the fuel squirt. But probably, it won't have to be touched.



Questions should be asked in our forum (Use discuss link below). The forum is very active and you stand a good chance of getting your questions answered there. If you would like to leave feedback for the author, or have additional information you think will benefit others, please use the comment section at the bottom of this page.

Discuss this article on the forums. (10 posts)


DISCLAIMER: This information and procedure is provided as a courtesy and is for informational purposes only.  Neither the publishers nor the authors accept any responsibility for the accuracy, applicability, or suitability of this procedure.  You assume all risks associated with the use of this information.  NEITHER THE PUBLISHERs NOR THE AUTHORs SHALL IN ANY EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OF ANY NATURE ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE USE OR MISUSE OF THIS INFORMATION OR LACK OF INFORMATION.  Any type of modification or service work on your motorcycle should always be performed by a professional mechanic. If performed incorrectly, this procedure may endanger the safety of you and others on your motorcycle and possibly invalidate your manufacturer’s warranty.


Quote this article on your site | Views: 67476

  Comments (7)
Accelerator duration screw adjustment
Written by LuckyDon, on 01-02-2015 16:33
ABF284... I found the same thing. The adjustment screw seems too far away from the plastic cam to be able to come into play.
Pump timing
Written by gold03, on 05-02-2014 21:05
Just one thing regarding pump timing. The pump must start to spray fuel before the throttle plate moves. If it des't you get a sudden lean spot and it will pop back through the carb. You need to slowly turn the throttle while looking at the throttle plate and adjust the top screw out to make it come in sooner and in to delay it.  
 
Much carb popping and coughing will be cured this way. 
 
Mine was set late from the factory and needed top screw adjusted.
Pump plunger binding.
Written by compman, on 07-01-2013 17:25
On my 03 model I have had a problem with the accelerator pump plunger binding against the pump cam arm. The cam is spring loaded to push the plunger down as the throttle opens, either the spring is too weak to do the job or as I have found periodic cleaning of the mechanism and lube the sliding face of the pump cam arm and pump plunger plastic cap with a dry slide graphite spray will do the job for a while.
Written by n8sroadstar, on 05-03-2012 23:39
thanks for the info
jetting
Written by blackmark, on 04-27-2010 17:11
Im confused on which jet kit to go with Dynojet or Mikuni?
Has not helped
Written by afb284, on 09-15-2008 19:02
I had a question. Even though I adjust the accelerator adjustment screw it does not appear to make a difference as the accelorator pump cam seems too far away from the screw anyway, for its adjustment to make a difference. Perhaps my cam is not aligned properly?
Thanks for this valuable info
Written by mrdantzler, on 09-29-2006 20:28
Thanks so much!! I just bought a brand new 2006 silverado about a week ago and I had the exact same problem right of the showroom floor and it was very frustrating. I was beginning to think this bike was a piece of junk. But, I followed your suggestions and turned up the idle speed the problem has greatly improved. It still does the occasional pop or cough but I guess I will have to live with it. Thanks again!

Only registered users can write comments.
Please login or register.

Powered by AkoComment Tweaked Special Edition v.1.4.6
AkoComment © Copyright 2004 by Arthur Konze - www.mamboportal.com
All right reserved

 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

Copyright 2003-2007 Road Star Clinic and its respective authors.
<-- -->