Favoured: 0
|
|
TOPIC: Will Not Start
|
|
Will Not Start 3 Years, 10 Months ago
|
|
Cannot get my 2000 RS to start. I have a new battery installed. When I hit the start switch it makes a click sound around the engine area. Not at the starter & not at the relay. Any suggestions?
Thanks
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
Check your ground and positive leads and make sure you have clean connections.
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
Warden (Moderator)
Moderator
Posts: 9535
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
jd750ace wrote:
Check your ground and positive leads and make sure you have clean connections.
+1 Amazing how a bad connection can effect it. If the battery is good, I would look there first!
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
Check the connections as others have stated.
As for the clicking noise, that isn't the starter or relay, is it on the right side of the bike?
I'm not aware of them making much noise, but I wonder if you could be hearing the decompression solenoid.
|
|
|
Logged
|
|
The administrator has disabled public write access.
|
Erbman02 (User)
Platinum Boarder
Posts: 7000
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
Get battery load tested.
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
New batteries can be bad like Erbman said have the battery load tested. It also may need to be charged and make sure the post and the cables are clean.
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
I have cleaned all the connections and it is a brand new battery?
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
dabe1800 wrote:
I have cleaned all the connections and it is a brand new battery?
Take a heavy wire and go directly from the battery positive to the starter. With the key on touch the wires and see if she turns over, this will determine if it's the starter. If she turns over I would look at the starter relay.
|
|
|
Logged
|
|
' width='150' border='0' style='max-width:450px; ' />
|
|
The administrator has disabled public write access.
|
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
Other things that can keep it from starting:
- Kill switch - make sure it's off.
- Kickstand switch - make sure it's not faulty (put it in neutral to start)
|
|
|
Logged
|
|
Feel free to PM me and call my attention to any detailing or electronics questions!
Find me on Facebook, make sure you mention you`re from RSC!
|
|
The administrator has disabled public write access.
|
|
Re:Will Not Start 3 Years, 10 Months ago
|
|
I have cleaned all the connections at the battery (+ & -), and cleaned the connection where it grounds to the engine (Oil Fill/Dipstick). The battery has 12.5 volt charge. it drops to 12.2 volts when ignition is turned on. when I hit the start button it drops to 12 volts. The clicking is coming from the right side it seems. I haven't had the battery load checked. I thought me measuring voltage while hitting the start button would be about the same?
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
-->