Road Star Forum	ForumThreaded ViewRules

Welcome, Guest Please Login or Register.    Lost Password?

Favoured: 0

Page: << Start < Prev 1 2 Next > End >>

TOPIC: Re:master cylinder bore size question. Forum Tools Post New Topic Show latest posts Rules

#734414 smokescreens (User) lifes better riding twins Platinum Boarder Posts: 17430 master cylinder bore size question. 4 Years ago   hey quick one guys. on a 1700 road star is the front master cylinder a 14mm bore?   Logged       The administrator has disabled public write access. #734418 Frosty (User) Chrome ain't for sissies Platinum Boarder Posts: 2372 Re:master cylinder bore size question. 4 Years ago   Both of my front master cylinders (1700's) have a 14 stamped on the front. Does that help?   Logged     2004 Road Star Midnight   The administrator has disabled public write access. #734422 smokescreens (User) lifes better riding twins Platinum Boarder Posts: 17430 Re:master cylinder bore size question. 4 Years ago   that is what makes me think its 14mm and i seen on another thread someone said 14mm but thats only about 9/16" seams small for dual disk unless it has a longer travel i was looking at a 5/8" or 11/16"   Logged       The administrator has disabled public write access. #734424 hardone2get (User) Who care's what you ride! Just ride! Platinum Boarder Posts: 3562 Re:master cylinder bore size question. 4 Years ago   smokescreens wrote: that is what makes me think its 14mm and i seen on another thread someone said 14mm but thats only about 9/16" seams small for dual disk unless it has a longer travel i was looking at a 5/8" or 11/16" Are you trying to determine if the H.D. master will work properly?   Logged     ' width='150' border='0' style='max-width:450px; ' />   The administrator has disabled public write access. #734439 smokescreens (User) lifes better riding twins Platinum Boarder Posts: 17430 Re:master cylinder bore size question. 4 Years ago   Trying to figure out what bore to use. I found out it will work just fine with the stock controls i just need to pick a bore size   Logged       The administrator has disabled public write access. #734445 ultrastar (Moderator) We Call Her Big Red (Secretariat) 110 Big Bore Moderator Posts: 9536 Re:master cylinder bore size question. 4 Years ago   The I have one right here in my hand don't know if it's off a 1600 and 1700 it's 14 mm   Logged     My Rides   The administrator has disabled public write access. #734447 smokescreens (User) lifes better riding twins Platinum Boarder Posts: 17430 Re:master cylinder bore size question. 4 Years ago   Ok so i will go with a 9/16 or 5/8 Master. 9/16" is almost a perfect match to ours but if i get a good deal i will get a 5/8.   Logged       The administrator has disabled public write access. #734452 blue_star (User) Platinum Boarder Posts: 6570 Re:master cylinder bore size question. 4 Years ago   Pretty sure the 1700 is actually 14mm and the 1600 is 5/8". With you using a single 6 piston caliper, it kinda changes things a little but either size should work ok, I think.   Logged       The administrator has disabled public write access. #734461 smokescreens (User) lifes better riding twins Platinum Boarder Posts: 17430 Re:master cylinder bore size question. 4 Years ago   thats different 14mm is just under 9/16 on two 4 piston calipers. why would the 1600 use a larger bore on two 2 piston calipers so confused!! i agree though i think 9/16 or 5/8 will be fine.   Logged       The administrator has disabled public write access. #734466 blue_star (User) Platinum Boarder Posts: 6570 Re:master cylinder bore size question. 4 Years ago   I think JD could probably explain how the sizing works on master cylinders. I just know that the 1600 is bigger than the 1700.   Logged       The administrator has disabled public write access.

Page: << Start < Prev 1 2 Next > End >>

Forum List Technical Corner Technical Discussions

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->