Favoured: 0
|
|
TOPIC: Re:Running UBER rich
|
|
Re:Running UBER rich 3 Months, 4 Weeks ago
|
|
thatjeepguy wrote:
My bike came with a K&N big air kit. I contacted K&N and they tell me....
"Thank you for contacting K&N Engineering. We understand you're looking for more information regarding the installation of the RK-3925-1. The RK-3925-1 installation instructions do specify that you MUST use a carburetor recalibration kit. Upon installing this product, you must re-jet your carburetor."
I did look up the installation instructions on the K&N web site and it does say that a recalibration kit is required at the top of the installation sheet but they don't say what one consists of or how to install it.
I guess my question is.....Replacing pipes requires re-jetting to a certain size jet with a stock air cleaner. If the BAK is installed, do I need to re jet again to an even bigger size jet?No, because you don,t normally rejet with just exhaust change.
|
|
|
Logged
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 4 Weeks ago
|
|
Ok, I opened the carb and besides it being extremely dirty, I found a 210 main jet and the pilot I have no idea because there are no markings on it. I also found a cracked diaphragm cover and a fuel filter that is the color of caramel.
|
|
|
Logged
|
|
Last Edit: 2017/10/28 15:19 By thatjeepguy.
|
|
The reason I talk to myself is because I\'m the only one whose answers I\'ll accept.
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 4 Weeks ago
|
|
Did the main jet have anything else on it, other then the 210? Maybe a box with an"R" in it? If its just the 210, then its probably a DJ main jet, and way big.
The Pilot will be marked on the side. You'll need a magnifying glass and a good light to see it, more then likely.
Replace the Coasting enricher cover.
A new fuel filter never hurts anything but the pocket book.
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 4 Weeks ago
|
|
SKWEARpeg wrote:
Did the main jet have anything else on it, other then the 210? Maybe a box with an"R" in it? If its just the 210, then its probably a DJ main jet, and way big.
The Pilot will be marked on the side. You'll need a magnifying glass and a good light to see it, more then likely.
Replace the Coasting enricher cover.
A new fuel filter never hurts anything but the pocket book.
Nope, just a 210. I double checked the pilot and there really are no marks anywhere
|
|
|
Logged
|
|
Last Edit: 2017/10/28 19:46 By thatjeepguy.
|
|
The reason I talk to myself is because I\'m the only one whose answers I\'ll accept.
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 4 Weeks ago
|
|
|
|
|
Logged
|
|
Last Edit: 2017/10/28 19:45 By thatjeepguy.
|
|
The reason I talk to myself is because I\'m the only one whose answers I\'ll accept.
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 4 Weeks ago
|
|
Pick up what Dave suggested. If it has the multigroove needle, put the clip in the forth with the fat spacer, and a single silver washer under the clip.
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 4 Weeks ago
|
|
Ordered everything tonight. Should have it all back together next weekend.....
|
|
|
Logged
|
|
The reason I talk to myself is because I\'m the only one whose answers I\'ll accept.
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 3 Weeks ago
|
|
So I ordered the 170 main jet and 37.5 pilot like you suggested. I'll let you know how it runs after I swap them in!
|
|
|
Logged
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 3 Weeks ago
|
|
KondratkoJoe wrote:
So I ordered the 170 main jet and 37.5 pilot like you suggested. I'll let you know how it runs after I swap them in!
You will love the way it will run and perform with your new jetting.
|
|
|
Logged
|
|
dave
|
|
The administrator has disabled public write access.
|
|
Re:Running UBER rich 3 Months, 3 Weeks ago
|
|
So I put the 170 main in and put the PMS to 2.5. The needle clip is also at the 4th position. The order goes (from top to bottom) washer, e-clip (4th slot), spacer, then washer. Is that fine?
Also, The pilot jet I ordered is for a bigger mikuni carb because the jet didn't fit into the pilot jet spot. The jet was too fat for the hole. How do I know what size 37.5 pilot jet to order? You can imagine my crestfallen attitude once I figured that out
|
|
|
Logged
|
|
The administrator has disabled public write access.
|
|
|
|
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
-->