This is an archived version of the Road Star Clinic. The Road Star Clinic can now be found at www.roadstarclinic.com. Please join us there!

Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Go to bottom Post Reply Favoured: 0
TOPIC: Re:Running UBER rich
#1024751
SKWEARpeg (User)
Platinum Boarder
Posts: 12885
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Milton, Florida Birthdate: 1958-00-00
Re:Running UBER rich 3 Months, 3 Weeks ago  
KondratkoJoe wrote:
So I put the 170 main in and put the PMS to 2.5. The needle clip is also at the 4th position. The order goes (from top to bottom) washer, e-clip (4th slot), spacer, then washer. Is that fine?

Also, The pilot jet I ordered is for a bigger mikuni carb because the jet didn't fit into the pilot jet spot. The jet was too fat for the hole. How do I know what size 37.5 pilot jet to order? You can imagine my crestfallen attitude once I figured that out


Go back to page one, and read JD's post where he gives the part numbers.

The stack up on the needle, is fine.
 
Logged Logged  
 
  The administrator has disabled public write access.
#1024754
davej (User)
Platinum Boarder
Posts: 18167
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Toledo Ohio Birthdate: 1957-00-00
Re:Running UBER rich 3 Months, 3 Weeks ago  
N224.103.37 is for the pilot jet.
 
Logged Logged  
 
dave
  The administrator has disabled public write access.
#1025084
thatjeepguy (User)
Fresh Boarder
Posts: 61
graphgraph
User Offline Click here to see the profile of this user
Re:Running UBER rich 3 Months, 2 Weeks ago  
I replaced the jets and cleaned the carb really well. The pms screw was at 3 turns out. Should I leave it there with the new jetting?
 
Logged Logged  
 
Last Edit: 2017/11/10 08:30 By thatjeepguy.
 
The reason I talk to myself is because I\'m the only one whose answers I\'ll accept.
  The administrator has disabled public write access.
#1025097
davej (User)
Platinum Boarder
Posts: 18167
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Toledo Ohio Birthdate: 1957-00-00
Re:Running UBER rich 3 Months, 2 Weeks ago  
thatjeepguy wrote:
I replaced the jets and cleaned the carb really well. The pms screw was at 3 turns out. Should I leave it there with the new jetting?

Go in about 1/2 turn so it will be at 2 1/2 turns out when done.
 
Logged Logged  
 
dave
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts


The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

Copyright 2003-2007 Road Star Clinic and its respective authors.
<-- -->