First off, Curt I put the new intake manifold on and it looks real nice. Thank you for the nice work you did on the manifold for me!
2007 roadstar 1700
Now, I have this problem and I can not figure it out. I bought a brand new hsr
. Jetting is as follows Pilot
: 25, Main
: 175, Pump Nozzle: 70, Needle: 97 on 3 clip, TPS
installed and set at 664ohm at idle 940-958. The problem I am having is the bike will take a long time to return to idle if not at all unless I blip the throttle or grab ahold of the throttle shaft and return it which will work most of the time too. Now I have sprayed wd40, brake cleaner, carb cleaner, and starter fluid at this and there is no leakes around the intake to the jugs and the carb to the intake. I have adjusted the air mixer, the idle, and needle height and nothing has worked. I have taken a video and uploaded it to photobucket but it has not appeared yet. Says it could take sometime. Once it does I will post the web address hear for those who want to hear it and watch the idle. I am using a ESI 328 EZ Tach +Plus Tachometer for the idle. So any help on this. If not, I am ready to go back to the cv carb. If anyone out there has one and you want to just swap then I'm game. Just the carbs. Don't need cables, TPS or the choke cable. I still have my old carb but the accelerator pump nozzle is no good on mine and I can not find a replacement nozzle. So I do need a stock carb. Maybe someone else will get this to work on theres. Thanks for the help!