Thanks. That’s good to know.
your wlcm Steve, btw how is the flatness on your EBC. Mine was a little out of flat on the countertop when I bought it, and am wondering if that could be causing some of the slippage I'm still having with my 1700.
Have about 35k on the bike so wondering too if the PO may have road the clutch hard and the discs are just gettin thin. Don't know if that would cause slippage.
It seemed OK. Maybe a 1/32” off. I have about 40k on the bile/clutch.
Yeah I don't think that would be a problem. when the spring retainer plate tightens down, the spring flattens out anyway against the plates.