Re:HELP...... one piston not firing
Favoured: 0
|
|
TOPIC: Re:HELP...... one piston not firing
|
|
Re:HELP...... one piston not firing 3 Months, 1 Week ago
|
|
If you have spark and it is not backfiring through the carb I’d say a stuck exhaust valve. The orange and gray wires that feed the coil have flag terminals on them. I had one contacting the carb cable bracket that shorted the feed to the coil once, so check good under there and make sure nothing is touching them. Mine had a tiny little hole in the cover on the flag terminal. It only made contact when the motor was vibrating.
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:HELP...... one piston not firing 3 Months, 1 Week ago
|
|
Probably be a good idea to do a compression test...I'm going with the stuck valve........ 
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
ctkog (User)
Expert Boarder
Posts: 523
|
Re:HELP...... one piston not firing 3 Months, 1 Week ago
|
|
+1 on the compression test like flashback said.. and if you do have svs one thing I've heard of is to shoot some penetrating oil on the valve stems thru the head ports. better yet if you can take the valve cover off let gravity draw it down between the guides.
|
|
|
Logged
|
|
---------- NOTHING STRAIGHTENS MY HEAD OUT BETTER THAN AN ENTIRELY CROOKED ROAD-----------
|
|
The administrator has disabled public write access.
|
|
Re:HELP...... one piston not firing 3 Months, 1 Week ago
|
|
Had the exact same thing on my 2000 roadstar. It was a sticking valve. I just poured Seafoam into the intake slowly with the motor idling high then let it sit for about a half hour or so before cranking it up and blowing it out. Worked like a charm!
|
|
|
Logged
|
|
The administrator has disabled public write access.
|
|
Re:HELP...... one piston not firing 3 Months, 1 Week ago
|
|
Marvel Mystery Oil is magic sauce for sticking valves on air cooled aircraft engines.
|
|
|
Logged
|
|
|
|
The administrator has disabled public write access.
|
|
Re:HELP...... one piston not firing 3 Months, 1 Week ago
|
|
hey all for the reps.... finally got around to my sons and we can safely say it not electrical, plugs all good (new) checked for spark..... leeds coils ignition box all good.... cleaned out the carb just because, fuel filter air filter bla bla.
what i found after cranking it over...... still only one cylinder (rear) firing and absolutely nothing from the front, if i had placed a feather in the end of the pipe it wouldnt have got blown out. no pumping of anything.
so i guess that means svs
now how the f#%k do i fix that, cant get seafoam here but im sure there will be something similar, like to try something easy before pulling anything apart
did find Marvel Mystery Oil.... but it would take too long to ship....
it did backfire out through the carb a few times.....
|
|
|
Logged
|
|
Last Edit: 2017/11/19 06:55 By masterhermit.
|
|
The administrator has disabled public write access.
|
|
Re:HELP...... one piston not firing 3 Months, 1 Week ago
|
|
masterhermit wrote:
hey all for the reps.... finally got around to my sons and we can safely say it not electrical, plugs all good (new) checked for spark..... leeds coils ignition box all good.... cleaned out the carb just because, fuel filter air filter bla bla.
what i found after cranking it over...... still only one cylinder (rear) firing and absolutely nothing from the front, if i had placed a feather in the end of the pipe it wouldnt have got blown out. no pumping of anything.
so i guess that means svs
now how the f#%k do i fix that, cant get seafoam here but im sure there will be something similar, like to try something easy before pulling anything apart
did find Marvel Mystery Oil.... but it would take too long to ship.... Can you get Yamaha ringfree at your dealer?
it did backfire out through the carb a few times..... Can you get Yamaha ringfree at your dealer?
|
|
|
Logged
|
|
Last Edit: 2017/11/19 07:51 By roadiemort.
|
|
The administrator has disabled public write access.
|
|
Re:HELP...... one piston not firing 3 Months ago
|
|
well the decarb spray sh*t didnt work.... pulled the valve cover off and could see that only 3 of the push rods were moving, so going to check the valve lifter on the one thats not moving....?
so why would 3 push rods move and 1 not....? what should i check....?
|
|
|
Logged
|
|
The administrator has disabled public write access.
|
|
Re:HELP...... one piston not firing 3 Months ago
|
|
Cam/lifter issue of some sort. Is the valve on the non moving push rod stuck open or closed?
|
|
|
Logged
|
|
Last Edit: 2017/11/25 18:17 By davej.
|
|
dave
|
|
The administrator has disabled public write access.
|
|
Re:HELP...... one piston not firing 2 Months, 4 Weeks ago
|
|
davej wrote:
Cam/lifter issue of some sort. Is the valve on the non moving push rod stuck open or closed?
sorry for such a slow reply.... from what my son says, stuck closed
|
|
|
Logged
|
|
The administrator has disabled public write access.
|
|
|
|
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
-->