Re:Baron PMS screw fell out - spring washer o-ring?
Favoured: 0
|
|
|
TOPIC: Re:Baron PMS screw fell out - spring washer o-ring?
|
|
|
|
Baron PMS screw fell out - spring washer o-ring? 10 Months ago
|
|
|
A couple of miles from home today and my Baron's screw fell out. I didn't even know it was loose. I was able to get it running with enricher full out and I made it home.
So I can get a new screw, but I don't think it comes with the spring, washer, and o ring. Is that correct? Where can I get those?
Maybe I'm mis-remember how it goes together.
|
|
|
|
 Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
Doc_V (User)
Platinum Boarder
Posts: 6530
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 10 Months ago
|
|
Nope, no spring washer or oring, it's only the screw...and those orings are a special size. I lost one and never found the right size no matter how many stores and shops I checked. One of those carb sites might have it, I never tried there.
P.S. I'd noticed my Barons needle worked loose so now I just leave the 7 inch piece of fuel line I used to adjust my PMS while riding. I just slid the fuel line over the Barons screw and carb flange that surrounds it and it keeps the PMS from vibrating loose. I loosely secured the other end of the fuel line, to the carb mount with a zip tie, so it doesn't fall off while riding. |
|
|
|
Logged
|
|
|
Last Edit: 2017/04/29 02:06 By Doc_V.
|
|
|
It\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'s been lots of fun guys... Thank you Gram and catch you all on the other site.
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 10 Months ago
|
|
If you get a OEM pilot screw from the dealership it only comes as a set with everything you need and it is less than $6
. Pilot Screw Set
4WM-14105-00-00
$5.88 |
|
|
|
Logged
|
|
|
dave
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 10 Months ago
|
|
As an option, I have those parts from a parts carb if you want them. Gratis. |
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 10 Months ago
|
|
|
Thanks JD. I appreciate that. I'd happy to for parts. I just want to make sure I get the right thing. I'll PM my addy.
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 9 Months, 3 Weeks ago
|
|
|
Back on the road! Thanks JD for giving me the stock spring, washer, and o-ring. He mailed it from TX on a Saturday, and I got it Monday! But it took over a week for the new Baron screw to get here.
And thanks DocV for the idea of leaving the hose on. I kept a piece in the saddlebag in case I needed to adjust. Now I just have it wedged in there. Should keep the screw in place just fine.
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 9 Months, 3 Weeks ago
|
|
|
Would a Small dab of Blue Loctite be to much? When I re-jetted I was thinking about it falling out, This only gets me nervous about it again..
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 9 Months, 3 Weeks ago
|
|
I had carb trouble too LOL. I went for a long test ride, came home parked the Bike, and when I came back bout an hour later She No Start??? I was in a hurry so I jumped in the Crown Vic an flew. I looked at the RS Yesterday and guess what Mikie forgot to tighten the clamp on the carb and it pop of the manifold. What a dumb S#!t I am, I wish all of my problems were that ez to solve. On the road again wohooooo!!!!
Have a great day People I'm off for some wind therapy. Mike/EZ |
|
|
|
Logged
|
|
|
If It\'s Not Broke, It Must Be Time For An Upgrade
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 9 Months, 3 Weeks ago
|
|
|
Tykes_Place wrote:
Back on the road! Thanks JD for giving me the stock spring, washer, and o-ring. He mailed it from TX on a Saturday, and I got it Monday! But it took over a week for the new Baron screw to get here.
And thanks DocV for the idea of leaving the hose on. I kept a piece in the saddlebag in case I needed to adjust. Now I just have it wedged in there. Should keep the screw in place just fine.
Glad to help when I can.
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
Doc_V (User)
Platinum Boarder
Posts: 6530
|
|
Re:Baron PMS screw fell out - spring washer o-ring? 9 Months, 2 Weeks ago
|
|
davej wrote:
If you get a OEM pilot screw from the dealership it only comes as a set with everything you need and it is less than $6
. Pilot Screw Set
4WM-14105-00-00
$5.88
Dave, that's great info... Where were you two years ago? 
|
|
|
|
Logged
|
|
|
It\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'s been lots of fun guys... Thank you Gram and catch you all on the other site.
|
|
|
The administrator has disabled public write access.
|
|
|
|
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
-->
