You will need the apes, longer throttle cables (I just used the pull cable) and a longer brake line from the master cylinder to the T. If you buy HD bars you may need to remove some material on the ends of a stock 1 piece riser (on 1 1/4 bars only) as the spacing on the HD bars is slightly narrower than on Yamaha bars. I extended the wiring inside the bars on mine. The bars I bought were predrilled for this. I had to drill a hole in the bottom of the riser to run the wires through. To use 14's You will need cables, longer brake line and longer wires. We're having a Meet & Greet in Eureka Springs Arkansas October 7th 8th & 9th. You're officially invited and
From Eureka Springs Ar.