<
 
 
 
 
?
>
hide You are viewing an archived web page collected at the request of Road Star Clinic using Archive-It. This page was captured on 08:24:44 Feb 27, 2018, and is part of the Road Star Clinic Closure collection. The information on this web page may be out of date. See All versions of this archived page. Loading media information

This is an archived version of the Road Star Clinic. The Road Star Clinic can now be found at www.roadstarclinic.com. Please join us there!

Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Road Star Forum Technical Corner Technical Discussions
Re:Broken Oil Pump Gear replaced. Now Oil Pump stuck?
Go to bottom Post Reply Favoured: 0
TOPIC: Re:Broken Oil Pump Gear replaced. Now Oil Pump stuck?
#785006
Booster (User)
Platinum Boarder
Posts: 2870
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Asheville, NC Birthdate: 1961-09-05
Re:Broken Oil Pump Gear replaced. Now Oil Pump stuck? 3 Years, 8 Months ago  
V.I.M.2 wrote:
Hey Edge! Good luck to you too!
Installing the Barnett clutch is quite simple, the only thing that I found tricky was to remove the inner basket nut to get the whole clutch assembly out and access the oil driven gear. Make sure to use a clutch holder.
Check out this thread as it might help you:
http://roadstarclinic.com/component/option,com_fireboard/Itemid,187/func,view/id,615353/catid,51/limit,10/limitstart,0/

Clutch holder not necessary if a air gun is used.
 
Logged Logged  
  The administrator has disabled public write access.
#785007
Booster (User)
Platinum Boarder
Posts: 2870
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Asheville, NC Birthdate: 1961-09-05
Re:Broken Oil Pump Gear replaced. Now Oil Pump stuck? 3 Years, 8 Months ago  
V.I.M.2 wrote:
Hey Edge! Good luck to you too!
Installing the Barnett clutch is quite simple, the only thing that I found tricky was to remove the inner basket nut to get the whole clutch assembly out and access the oil driven gear. Make sure to use a clutch holder.
Check out this thread as it might help you:
http://roadstarclinic.com/component/option,com_fireboard/Itemid,187/func,view/id,615353/catid,51/limit,10/limitstart,0/

Clutch holder not necessary if a air gun is used.
 
Logged Logged  
  The administrator has disabled public write access.
#785008
Booster (User)
Platinum Boarder
Posts: 2870
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Asheville, NC Birthdate: 1961-09-05
Re:Broken Oil Pump Gear replaced. Now Oil Pump stuck? 3 Years, 8 Months ago  
WTF.... FN' phone!
 
Logged Logged  
 
Last Edit: 2014/06/13 09:02 By Booster.
  The administrator has disabled public write access.
#785009
Edge51 (User)
2000 Roadstar
Platinum Boarder
Posts: 5447
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: B.C. Canada
Re:Broken Oil Pump Gear replaced. Now Oil Pump stuck? 3 Years, 8 Months ago  
V.I.M.2 wrote:
Hey Edge! Good luck to you too!
Installing the Barnett clutch is quite simple, the only thing that I found tricky was to remove the inner basket nut to get the whole clutch assembly out and access the oil driven gear. Make sure to use a clutch holder.
Check out this thread as it might help you:
http://roadstarclinic.com/component/option,com_fireboard/Itemid,187/func,view/id,615353/catid,51/limit,10/limitstart,0/

thanks V.I.M.2 Barnett is due here Monday. Oil driven gear will be later..
 
Logged Logged  
 
  The administrator has disabled public write access.
#785081
V.I.M.2 (User)
Fresh Boarder
Posts: 10
graphgraph
User Offline Click here to see the profile of this user
Re:Broken Oil Pump Gear replaced. Now Oil Pump stuck? 3 Years, 8 Months ago  
Hey Booster, you are absolutely right! Unfortunately I don't have one so this is what worked for me. Thanks for the input!
 
Logged Logged  
  The administrator has disabled public write access.
#785093
75kona (User)
Platinum Boarder
Posts: 1153
graphgraph
User Offline Click here to see the profile of this user
Re:Broken Oil Pump Gear replaced. Now Oil Pump stuck? 3 Years, 8 Months ago  
I too would like to know how you realized it broke.
 
Logged Logged  
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Miscellaneous, 2/18/2018, 52 replies
Subject: The Last Post
BikerRon: Hopefully, someone can take a screenshot of the last post before the plug is pulled and share it on the new site. Curious as to who it will be and what inspiring words will be left. :)
Latest reply, 2/22/2018
Shores: You lose!The Last Post
53 posts, last by:
Shores
In: Miscellaneous, 2/17/2018, 9 replies
Subject: Come on over!
Tykes_Place: There's a lot of posts here since the new site launched. We might have a plan to retain the old site data, but it's not guaranteed. So why not take the discussions over to the new site? http://www.roadstarclinic.com ...
Latest reply, 2/22/2018
Shores: I’ll be there in a minute. Go getchur scooter! Come on over!
10 posts, last by:
Shores
In: Miscellaneous, 2/21/2018, 30 replies
Subject: Logins will be disabled Thursday night (2/22)!!
Gram: Hi Everyone, The time has come for us to start the process of winding the old clinic down. The new team has commissioned a site archive of this site, which requires an extensive site crawling process, ...
Latest reply, 2/22/2018
Shores: Logins will be disabled Thursday night (2/22)!!
31 posts, last by:
Shores
In: Miscellaneous, 2/22/2018, 6 replies
Subject: Time to tie up lose ends - the end is near!
mbk: Time to tie up all the loose ends - the end of life of this forum is only an hours away. I Want to thank Gram, Doc, USAFRetired, and all the others for all this site did for us and the money of ours it ...
Latest reply, 2/22/2018
Jaybo: Time to tie up lose ends - the end is near!
7 posts, last by:
Jaybo
In: Miscellaneous, 2/14/2018, 41 replies
Subject: Last one out shut the lights off.
JEastonjr: I just like to say one last thing on this site. I think I joined in 2010 and this was and is the best forum I found. The people were friendly and helpful when I didn't know squat about the biggest bike ...
Latest reply, 2/22/2018
Jaybo: yup!Last one out shut the lights off.
42 posts, last by:
Jaybo
In: Miscellaneous, 2/22/2018, 12 replies
Subject: Thursday Night Music
pbirk:
Latest reply, 2/22/2018
Jaybo: Thursday Night Music
13 posts, last by:
Jaybo
In: Non Motorcycle Topics, 2/22/2018
Subject: So many friends I haven't met yet
Lifeguard: I have made some good friends here and I hope to make many more on the new site. Learned alot and laughed alot. See you over there and thanks to everyone.:woohoo:
So many friends I haven't met yet
new topic by:
Lifeguard
In: Miscellaneous, 2/22/2018, 3 replies
Subject: Tipping My Hat
Bigrigme: It's been a great run. I won't be the last to post here, nor does being in the race for that interest me any. But I didn't want to walk away without a goodbye. Gram and Doc, everybody here including myself, ...
Latest reply, 2/22/2018
Chromeinator: Tipping My Hat 5 Hours, 8 Minutes ago  It's been a great run. I won't be the last to post here, nor ...Tipping My Hat
4 posts, last by:
Chromeinator
In: Miscellaneous, 2/22/2018, 1 reply
Subject: It was a great run
TMK: Thanks Gram...12 1/2 years for me and appreciate it very much!
Latest reply, 2/22/2018
Jadams1911: Thank you for the great years of the RSC!It was a great run
2 posts, last by:
Jadams1911
In: Jetting, 2/15/2018, 16 replies
Subject: dynojetting
Ian Pemberton: Hello again,I would like some advice for getting my bike properly dynojetted. I have fitted a spike air filter and Vance & Hines short shots(baffles in)along with Harley torque cones in the headers. All ...
Latest reply, 2/22/2018
Ian Pemberton: Thanksdynojetting
17 posts, last by:
Ian Pemberton
In: Technical Discussions, 1/19/2015, 92 replies
Subject: Fuel Injection Facts and Tips
Shores: Hey all you FI guys and gals. What about posting everything you know about tuning, adjusting and repairing our ? We can start here, see what comes of it and ...
Latest reply, 2/21/2018
AzTank: Long coming update. So, due to work and family schedules getting the priority, i'm finally able to ...Fuel Injection Facts and Tips
93 posts, last by:
AzTank
In: Body/Frame, 2/6/2018, 12 replies
Subject: Now, Saddle bags,,,
ronzee: Okay, everyone who said the bags I had on my bike wouldn't work with the stock exhaust system, you were right. Harley hard bags are just a little too long. Can't see any good coming out of the bag sitting ...
Latest reply, 2/21/2018
ronzee: Kinda fixed it. just got smaller bags. 30.00 on e-Bay with keys unlike the ones that were on it.:side:Now, Saddle bags,,,
13 posts, last by:
ronzee
In: Non Motorcycle Topics, 2/21/2018
Subject: Better save your PMs now if you want them.
Doc_V: If you have any information in your PMs that you want to save, better do it now. When the site is archived, that section will no longer be accessible since it requires a log in to access. So if there's ...
Better save your PMs now if you want them.
new topic by:
Doc_V
In: Miscellaneous, 2/19/2018, 25 replies
Subject: $20 saves ALL 14 YEARS of the original RSC forever
BubbaKahuna: IMPORTANT PLEASE READ Can you chip in $20 each to save ALL 14 years of the original RSC? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We have a unique opportunity to save the ...
Latest reply, 2/21/2018
Doc_V: That's not a bad idea and would be a lot easier to just drag and drop the files on to the USB sticks. ...$20 saves ALL 14 YEARS of the original RSC forever
26 posts, last by:
Doc_V
In: Bike Talk, 2/18/2018, 2 replies
Subject: Road glide mount
Engineman: Is there anymore out that there as I want to mount a road glide fairing on my bike? So who is the one that made a bunch for us to buy from? Thank you Brett
Latest reply, 2/21/2018
Engineman: Thank you mort!Road glide mount
3 posts, last by:
Engineman
In: Introductions, 4/16/2011, 35 replies
Subject: new to the rsc
roadiemort: but have been lurking a long time.really love this forum and all the help and knowledge thats available here. i ride ...
Latest reply, 2/20/2018
brad_g: :welcome:I would like to welcome myself to the clinic, thanks Mike:laugh: :laugh: PS My AIS is still ...new to the rsc
36 posts, last by:
brad_g
In: Miscellaneous, 2/20/2018
Subject: Be sure to head over to the *NEW* RSC site!
Doc_V: As was recently announced by Gram, this RSC site will be shutting down soon. The original date was to be February 28th, however, since a *new* site is already set up and *this* site will be archived, we ...
Be sure to head over to the *NEW* RSC site!
new topic by:
Doc_V
In: Pics of My Ride, 7/10/2016, 86 replies
Subject: Roadstar 1600cc Turbo
Ypsilon: Hi guys! I'm new to the clinic and wanted to show my ride. Had this baby for couple of years and turbocharged it last winter. Works great and the power is good except for a little dip in the enrichment ...
Latest reply, 2/20/2018
Littlebull: Got one not being used. If I remember you are in another country. Send zipcode and will get shipping ...Roadstar 1600cc Turbo
87 posts, last by:
Littlebull
In: Miscellaneous, 2/14/2018, 12 replies
Subject: Mobile App Subscription for Apple & Android
BubbaKahuna: OK, we've got the 'forum part' of the RSC Mobile App paid for. I haven't got to the Android store yet but Apple wants $99/year to put the app in their store. This will automatically renew every year ...
Latest reply, 2/19/2018
BubbaKahuna: It looks like it, we're kind of scrambling on a couple fronts right now but we should be good to go! I'm ...Mobile App Subscription for Apple & Android
13 posts, last by:
BubbaKahuna
In: Miscellaneous, 12/9/2017, 13 replies
Subject: 4Gauge upgraded battery cable sale $45 shipped
davej: I have 3 sets made and ready to ship $45 shipped in the U.S. I will ship elsewhere but shipping cost will be added. More sets are available if needed.
Latest reply, 2/19/2018
davej: Glenn402 you have a message check PM I sent to you.4Gauge upgraded battery cable sale $45 shipped
14 posts, last by:
davej
In: Introductions, 2/16/2018, 8 replies
Subject: Hello everybody! Greetings from Mexico!
Skyjadur Ulfur: Hello people, I'm from Mexico, I introduce to you Fenrir, a 2005 RoadStar Midnight Silverado S, would like some advises to improve overall performance and how to mount properly a Reckless Fairing, thanks ...
Latest reply, 2/19/2018
Skyjadur Ulfur: Thanks for the link, unfortunately it doest work, I cant get the facebook page! even with the link you ...Hello everybody! Greetings from Mexico!
9 posts, last by:
Skyjadur Ulfur
In: Miscellaneous, 2/14/2018, 12 replies
Subject: Left Testical no longer for sale
Warden: Please ignore the ad in the classifieds. :)
Latest reply, 2/19/2018
roadiemort: :woohoo: :woohoo: Left Testical no longer for sale
13 posts, last by:
roadiemort
In: Non Motorcycle Topics, 2/13/2018, 4 replies
Subject: Thank you Bubbakahuna!
Messer: I did a lot of bitching, but, wow the new site freaking rocks! Great job Bubbakahuna!
Latest reply, 2/18/2018
Chromeinator: +1Thank you Bubbakahuna!
5 posts, last by:
Chromeinator
In: Non Motorcycle Topics, 2/18/2018, 4 replies
Subject: All smilies for new board
Tykes_Place: Just posting this so I can download the image for the new board. :bbash: :welcome: :tank: :oops: :offtopic: :popcorn: :censored: :sleep: :innocent: :biglove: :pinch: :whistle: :evil: :S :side: :woohoo: ...
Latest reply, 2/18/2018
Tykes_Place: Good idea.All smilies for new board
5 posts, last by:
Tykes_Place
In: Miscellaneous, 2/16/2018, 13 replies
Subject: Bike stand
makriluc: Any one of you guys ever work on your R* with this ? http://cyclesource.com/newsblog/?p=35475 Your opinion?
Latest reply, 2/18/2018
davej: They look to be very well made.Bike stand
14 posts, last by:
davej
In: Maintenance, 1/11/2016, 16 replies
Subject: Work Shop Tach question
G_Conway: I have seen a number of posts regarding what hand held tach to use on our bikes. Many have stated that a coil proximity type is better than wire induction. My question, I believe, relates to both. Should ...
Latest reply, 2/18/2018
BikerRon: Guess I am still in the dark ages...I have an old runabout with a chevy 350 still running on ...Work Shop Tach question
17 posts, last by:
BikerRon
In: Miscellaneous, 2/17/2018, 3 replies
Subject: Awesome R*,s
roadiemort: http://www.midnight-ride.com/baronew.htm
Latest reply, 2/17/2018
ctkog: That's one sweet ride Gram. All it needs is the rear fender lowering kit. No I'm not trying to sell you ...Awesome R*,s
4 posts, last by:
ctkog
In: Miscellaneous, 2/13/2018, 37 replies
Subject: NEW BOARD IS UP & RUNNING @ .....
BubbaKahuna: Same address, just add WWW to the current address of roadstarclinic.com http://www.roadstarclinic.com Subtle difference in the address, but makes all the difference in the world to a server. Feel ...
Latest reply, 2/17/2018
Tykes_Place: 40 character chain? The new site doesn’t do anything like that.NEW BOARD IS UP & RUNNING @ .....
38 posts, last by:
Tykes_Place
In: Miscellaneous, 2/11/2018, 17 replies
Subject: Favorite Modular Helmets
Bigrigme: I'm in the market this spring to replace my old Icon full face helmet. I like the modular designs. I'm not looking to spend $600 but I also will not be settling for a sub $200 helmet either. What do you ...
Latest reply, 2/16/2018
mrjeff: While looking to see who still had these in stock I found some on eBay for such a good price I bought ...Favorite Modular Helmets
18 posts, last by:
mrjeff
In: Miscellaneous, 2/16/2018, 6 replies
Subject: How do I get ‘permissions’ - can’t post or reply
Ratl: Ok, I’ve registered and logged in to the new site, but evidently I don’t have ‘permissions’ to reply or create topics etc. :dry: What am I missing?
Latest reply, 2/16/2018
BubbaKahuna: You have a PMHow do I get ‘permissions’ - can’t post or reply
7 posts, last by:
BubbaKahuna


  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

Copyright 2003-2007 Road Star Clinic and its respective authors.
<-- -->