Heritage Community Foundation Presents
Alberta Online Encyclopedia
SitemapSearchHelpContactPartnersEdukitsHome
Resource Inventory
History of Development
Innovation and New Technology Visit Alberta Source! Heritage Community Foundation
Heritage Trails presented courtesy of CKUA Radio Network Canada's Digital Collections

Home > Alberta's Resource Inventory > Hydrocarbons > Crude Oil > Resource Development > Completion and Servicing > Perforation

Resource Inventory

Perforation

The third step after installing production caving and tubing is to perforate the well. The casing prevents the hole from collapsing, but it also prevents the oil or gas from entering the wellbore. Therefore, holes are made through the casing and into the formation. This is usually accomplished with an explosive device that is lowered into the well on an electrical wireline to the required depth. This device, a collection of explosive charges in a special carrier, is called a perforating gun. An electrical impulse fires the charges to perforate the casing, surrounding cement and reservoir rock.

Petroleum Communication Foundation. Our Petroleum Challenge: Exploring Canada's Oil and Gas Industry, Sixth Edition. Calgary: Petroleum Communication Foundation, 1999. With permission from the Centre for Energy.

previousNext

   


Soil and AgricultureHydrocarbonsForests


Albertasource.ca | Contact Us | Partnerships
            For more on natural resources in Alberta, visit Peel’s Prairie Provinces.
Copyright © Heritage Community Foundation All Rights Reserved