This is an archived version of the Road Star Clinic. The Road Star Clinic can now be found at www.roadstarclinic.com. Please join us there!

Assembling and Installing the Transfer Case

Print
User Rating: / 4
PoorBest 
Written by Randy Fox   
Saturday, 03 November 2007
Page 2 of 6

Installing the Oil-Tank Cover

transfer case oil tank, Yamaha Road Star

 

If you removed the oil-tank cover from the transfer case, do the following:

  • Bolt the oil baffle into oil-tank cover (3 bolts), if it was moved. Torque to 7.2 ft-lbs, which is 86.4 ft-lbs.
  • Clean and dry the oil tank's small rectangular screen.
  • Insert the rectangular screen into the transfer case. Be sure you orient its bulge out and toward the tank's center.
  • Install alignment dowels and a new gasket for the oil-tank cover.
  • Take picts.
  • Bolt and torque the oil-tank cover. Use 7.2 ft-lbs.
  • Stuff a rubber glove or a clean, lint free rag 1/2 way into the oil fill hole to keep dirt out.

 
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

Copyright 2003-2007 Road Star Clinic and its respective authors.
<-- -->